Hold the ALT key to disable point snappin.

and you may press h or ? for a list of keybinds and shortcuts.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/154965337

Thank you for adding more buildings. But please consider the instructions: "For rectangular buildings: In iD: Zoom in rather far ( 15 - 20 mtr ) draw an area and label it as 'building=yes', then correct for right angles with the Q key when the object is still selected."
---

Published using OSMCha: https://osmcha.org/changesets/154965337

Thx.
---

Published using OSMCha: https://osmcha.org/changesets/154484987

Inserted name Muhasuwa
place village
source MSFsurvey
source:date 2024 is_in:district Chiradzulu

very close to an older entry "Namitambo"

see: Mapping village locations in Malawi #BlantyreChiradzulu for #msf #missingmaps #maproulette http://mpr.lt/c/48374/t/232859399
---

Published using OSMCha: https://osmcha.org/changesets/154213379

Re: Task 232859485

found nearby an older point for village named Misesa B
while I added
Misesa Quarry A place village source MSFsurvey source:date 2024 is_in:district Blantyre
02:06 PM, July 20, 2024
---

Published using OSMCha: https://osmcha.org/changesets/154176282

Thank you
---

Published using OSMCha: https://osmcha.org/changesets/153834881

Much appreciated, Gregory, is see it : 153829531

Thank you for the heads-up,
Nodi
---

Published using OSMCha: https://osmcha.org/changesets/153829531

I found older mappings (done with ESRI) that looked now with Bing alligned, but not with the ESRI from now, so I adjusted the offset.
---

Published using OSMCha: https://osmcha.org/changesets/153824719

Danke, Frans. Thanks for the update💚

Cheers, Norbert

Thom B, I am not sure if these are valid buildings
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/150579696

Hi Ella, thank you. You identified a lot of buildings but did not square them accordingly. Please take note. With kind regards, Norbert
"After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners."
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/150991458

There ist so much to fix: buildings have tag "area" and are not even squared or round. Should I clean up?

"After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners."

Or use the 'O' key for round buildings.
---

Published using OSMCha: https://osmcha.org/changesets/149590221

added more, but did not square prior mappers work

@mrowls20
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/149578171

added more, but did not square prior mappers work

@nriceusa

Maybe you missed from the instructions:
After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/149590738

added more, but did not square prior mappers work

@mrowls20

Maybe you missed from the instructions:
After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/149578171

added more, but did not fix unsquared buildings mapped by @[abraun6] . Maybe you like to come back and look for yourself

"After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners."
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/149591541

added more, but did not fix unsquared buildings mapped by @[abraun6] . Maybe you like to come back and look for yourself

"After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners."
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/149592143

Concerning TASK 795 in
#15736: Missing Maps: Homa Bay county, Kenya (3)

Hi, @Asta_Asendia , I just checked in to this task and found your buildings are a bit strange.

Please use the Q key, to set right angles. Thank you.

"In iD: draw an area and label it as Building, then correct for right angles with the Q key. In JOSM: draw an area and use the tag building=yes, then correct for right angles using the Q key - OR use the building plugin. Most buildings are rectangular so make buildings rectangular even if a shadow, tree or roof pitch make it appear otherwise."

Hi, I squared and resized some 50 buildings. Please use in ID the key Q for buildings with right angles

@Geohprofe I squared some 88 buildings mapped by you.

"In iD: draw an area and label it as Building, then correct for right angles with the Q key. Most buildings are rectangular so make buildings rectangular even if a shadow, tree or roof pitch make it appear otherwise."

Please take note, and keep on mapping.