`=track` means land access road for accessing wild or wide undeveloped lands, not agriculture or any particular use. It can be `=paved` + `tracktype=grade1` etc. `=service` means access road serving a site or facility.

https://www.td.gov.hk/filemanager/en/content_5055/V9_11_2025.pdf#page=20
Can't find buses or rigid vehicle drive shaft, only articulated https://www.td.gov.hk/filemanager/en/content_5055/V2_11_2025.pdf#page=22

(Especially long vehicles as buses)

Furthermore swept path is often not close to a circular curve. When the turn is tight, there will be overshot, that you have to turn more outside, then turn back into the destined lane.

My perspective: Only draw curves when there's a curved island in front, or dashed line markings across the intersection

Those `highway=traffic_signals` are wrong. It should be changed to `man_made=street_cabinet` at the controller.

2. It should be a `=stop` not `=give_way`

You can don't do it yourself. But when it's done, you shouldn't remove it.

It could be acceptable if it exists regularly for some years. `=marketplace` + `informal=yes` may be used.

This wasn't created here, but did get moved upstream. Reminder that dashed line means it's crossable. Therefore I would use the same criteria as unhatched islands, 45~40~30deg to the nose.

1. OSM `place=` + `name=` is about common public use. Please don't upload personal-use data.
2. Please don't directly copy from wiki, AI, and Government only. They are incompatible copyright and ToS.

Please be careful not to make the entire `building=` as `=restaurant`

That's the bad advice we are talking about. `=bus_station` should at least have a dedicated u-turn road.

I had moved that to the sea first. But it can be considered for deletion too.

It's confusing as ground level is different on each side (3F vs 4F)

Oh I missed 4F?

Wait the 6F is departures already. Which floor are you referring to?

I must have copied from other features. Missed 1 level.

OSM `name=` is about names in existing common public use. Please use OpenHistoricalMap.

They are on 2 levels for departure and arrival (and this should be `level:ref=` not `level=` , from app limitation)